Battery Terminal Upgrade

One of the many projects I've had sitting on my to-do list, was upgrading the battery terminals on my Jeep TJ from stock to military style clamps. I know marine style is the usual upgrade, but after seeing Dave from Redneck Garage install these, I knew they were the right way to go.

I'm embarrassed to say that I've had the kit sitting around for nearly two years, and I can't find the original kit I ordered. So here are the current Amazon.ca and Amazon.com if you're interested.

As you can see, the original clamps have definitely seen better days. Adding accessories was a pain, the clamps were rotting out. I felt they were one removal away from breaking. 

The first step is to remove the stock clamps. This is pretty easy, just hit them with a a hot torch, MAPP Gas works really well. The stock clamps are lead, and lead has a fairly low melting point. Probably best to not do this in shorts, but I did, and my legs survived. Once the stock clamps are off, heat up the new lugs, fill them with solder, and shove the exposed wires from the old clamp into the molten solder. Make sure you use pliers, vice grips, and various other safely precautions. You are playing with molten metal here. I added some heat shrink tube, and sealed them up really well.

After everything has cooled off, route the wires, add the protective covers, and you're set. It's a solid upgrade that makes it easier to disconnect the battery or add accessories. I've previously added an auxiliary fuse panel, so while I may not need to add directly to the battery, it's nice to know I have the option

Delrin Door Hinge Liners

In one of those, "I didn't know that was a thing moments", I learned that Jeeps have door hinge liners. The reason this is new to me, is simply because back in my YJ days, no one actually complained about the hinges on their YJ's and CJ's. It was just expected that they were always buggered up and the doors were always hard to remove as a result.

Enter the past couple years, and while my TJ doors still came on and off easy enough, they were sagging when opened, making funny noises. You know, just typical Jeep door things. I was throwing lube at them (like my YJ) and that seemed to work. Until I discovered that they actually had liners, liners that are prone to rotting out, and liners that were replaceable.

TMR Customs makes some Delrin Door Hinge Liners  for all modern Jeeps. You can even order them with a removal tool. A tool I highly recommend getting.

Start by taking your doors off. Should go without saying. Line up the removal tool, and start hammering away. My bottom hinges were badly rusted in place, so I had to break out Mjolnir to, uh, convince the liner to come out. 

Once the  liner is out, hit the hinge with a rolled up piece of sandpaper to clean out any gunk, lube up the new liner (I used silicone spray lube) and push it in. It'll be tight, but the key here, is do not use a hammer.
New liner in place, looks much better than the old one, and I'll tell you, the door doesn't sag any more. Smooth like butter. 

 Here's a shot of my old upper and lower next to a new liner. Start to finish was about 30 minutes, and that was with fighting the lower liners out.

Nate's Jeep - Status Update

Back in January Nate had his first drive in his new Jeep.

Well, I finally got some time to spend in the garage, and rather than tackling the new fenders waiting to go on my Jeep, I decided Nate's Jeep had priority (that, and it was too cold outside for my liking)








To put it shortly. I'm quite happy with the results.

I've built a full wiring harness for this Jeep. It has a working ignition key, fuse panel, all power routes through a relay, a working voltmeter in the dash, and all the lights are real now. They're LED to help save the battery a bit.

I may add a charging port to the gas filler, and I'm considering adding a radio for some music, and maybe an FRS/GMRS radio




It's nearly ready for paint. I have to finish cleaning up the wiring and remove the stickers. I've also decided on an M38A1 motif, complete with soft top. I've also decided, that since my Jeep is Pavement Still Sucks, this shall be Pavement Stinks.

Below is a short walk around of how it stands now.

2018 To Do List - Keep on truckin'

2017 continued to be a bit of a bust for Jeep stuff. At least I did get out on the trails and did do a little tent camping in the backwoods.

For 2016 2017 2018, this is what I have planned

• Centre the steering wheel. 
• Despite my best efforts last year (July 2015), my steering wheel is still slightly off to the left. Annoying, yet easy to fix.
• Front Fender repair.
• Bought new fenders. Done messing with this one
• Front extended flares.
• Thanks to changes in the MTO's vehicle safety standards, my front tires need full tread coverage. I blame the MTO, but in reality, I'm tired of the dirt and mud sprayed up the side of my Jeep due to the front tires.
• Rear turn signals
• Again, thanks MTO. The previous owner of my Jeep flush mounted the taillights, and under the new rules, I require a visible rear turn signal on the side of the Jeep. Already got the lights, just need the weather.
• Need new taillights since mine rotted out inside. May go back to stock housings and lose the flush mount
• Battery Lug Replacement.
• Thanks to Dave at the Redneck Garage, I splurged on some new battery lugs. Shouldn't be too difficult to install them.
• Removable Mud Flaps.
• Going to fab something up for the rear to keep Johnny Law from getting too interested in my "Excessive Road Spray"
• Electric Radiator Fan.
• Been sitting in my garage for three years now. Maybe I should install it. At least I wired the switch into the cab already.
• New Fan Belt.

• To do when I change the fan.
• Rear Diff Service.
• Bought some Royal Purple max gear oil to change up the rear to see if it makes a difference on the Detroit unloading. Just gotta do it.
• Transmission Service
• Picking up some Redline MT-90, 'cause I hear it makes the AX-5 smooth as butter.
• Delrin Bushing for my Tire Carrier
• I run a pipe on a bolt tire carrier (homemade) and it could use a bushing in there. Gong to try and source some Delrin to use.
• Emergency Rear Axle Retainer.
• Got a thought on something that'll hold my axle together should I snap a shaft in the Dana 35c.
• Aim Headlight and Fog Lights.
• Pretty self explanatory. Just need a nice warm night
• Got new wiring on it's way in to make lights brighter (https://goo.gl/HFVs9V). So aiming will be a bigger priority
• New Winch Cable
• Again, pretty self explanatory.
• Missing bolt in Winch
• Snapped a bolt that holds the gear housing on. Has been fine for years. One of these days I'll head to Bolts+ and get a replacement.
• Jerrycan and Mount

• One day I'll get around to building a mount for a Jerrycan - Got a Jerry can for Christmas!
• Hi-Lift Mount.
• See above. One day
• Lockable storage
• Now that I have a kid, and need all the seats in, I need to build a new locking storage box for behind the back seat. Has to work with the CJ tailgate on the Jeep.
• Hitch mounted vice.
• I have a spare vice, I have spare 2"x2" square tube. I need to merge the two to have a vice that can travel with me.

Definitely getting out on the trails more. Camping and maybe a new tent are in order!

Also big this year, is trip to Moab. Yeah, you heard me, Moab. It's my 40th birthday gift from my wife to our family. Looks like the plan is to fly out, rent a Jeep and fly home. The logistics of getting my Jeep and family out there were costly. As much as I'd love to wheel my own Jeep there, this isn't the trip for it.

TJ Dash Upgrade... Upgrade?

A couple weeks back, I upgraded my dash tray to add a tablet mount, and deeper storage. 

After a couple test trips, it became painfully obvious that, as useful as the table was, it blocked enough of my view that right hand turns were dangerous. 

Today, using some flatbar, a cut off wheel, and a bolt, I relocated the table down and out of my way. It's a little harder to see, but I think infinitely safer. Still needs some minor tweaks, and a shot of pain, but I think it'll work better in the new location.

Jeep TJ Dash Tray Upgrade

I'll start with the big disclaimer. All products or services in this post are self purchased/downloaded. I receive no compensation for any product/service. I feel that this is the best way to remain unbiased and honest when reviewing. 

While the TJ really improved on actually giving Jeep owners a dashboard, the included tray for holding things isn't all that deep or useful. I decided that if I was going to be spending more time exploring the in the Jeep, I'd need a dedicated mount for a phone/tablet/GPS.

Enter the Rugged Ridge Dash Multi-Mount (Model 13551.19) and the Ilyever 2-in-1 Universal Tablet iPad Tripod Mount Adapter. The mount comes with a universal cellphone holder that seems to rest on all the buttons on my phone. However, it's a standard tripod screw mount, meaning any tripod accessory will work.

Installation is a snap. I started by cleaning the dash tray with some WD40 to ensure all dirt, oil and grime were removed. The first step is to attach the included 3M tape to the base of the Rugged Ridge unit. Once done, place and press the try into place on the existing tray. 

 Install the three self tapping screws directly into the stock plastic tray, and well, you're done. I had to use a stubby screwdriver as my mirror and dash cam were in the way of my full size screwdriver. Once done, the unit is solidly in place.

 I added the tablet holder to the mount, and there you go. It's easy to remove the mount and replace with cellphone or gps mount, or just leave it off altogether if you don't want to advertise. The mount seems solid enough. Being the dead of winter, and most of the trails being closed up this way, I won't be able to speak of how it holds up until I can get some wheels in the dirt this spring/summer. (See my update to the mount here )

I'm using a first generation Nexus 7 tablet with some great apps that I've found, and a bluetooth ODB adapter. I've had the Nexus 7 since launch, and lately it's been sitting in a drawer making me wonder what I should do with it. Guess I answered my own question

Apps that I've loaded, aside from the stock Google Maps, are as follows (all hot linked)

GPX Viewer
GPS Status
GPS Essentials
MapFactor GPS Navigation Maps
Torque Pro


I have used GPX Viewer and Torque Pro for a while now and can definitely speak to their usefulness. GPS Status, Essentials, and MapFactor are new apps I'm trying out. They all look like they work well, I think they'll find a permanent place on my device.

Nate's drive in his first Jeep

Back in June 2016, I picked up a Jeep for my son Nate. He was a wee one, and unable to reach the controls. That was ok, the Jeep needed a new battery, and well, I wanted to redo it with LED lights, a paint job, probably a working radio and CB (or FRS). I wasn't in a rush for him to learn to drive.

Fast forward to December 2017. The new battery that I had sitting in my Amazon Cart had a price drop for a day to $35. BOOM, Kev ordered.

The battery was charged, and then it sat. The weather did not cooperate, and I wasn't heading out to test it when I needed to wear multiple layers of clothing to not get frostbite.

Which leads us to this past Saturday.

My wife was working, and Nate and I were hanging out. It was warmer out, so I thought, lets try it out.

Nate was very excited to see the Jeep, to say the least. I had to show him how to push the gas to make it go, and he still needs help steering, but it was a good test for the battery, and well, as you can see by the video. Nate really enjoyed his time in the drivers seat. This kid is going to be a Jeeper. 

Overall, for the $85 I've got invested, I think this Jeep is going to be a win.